Disruptive technologies, forms and applications
2018年4月11-12日 | ドイツ、ベルリン、Estrel Convention Center

研究者によるポスター発表

ポスター発表は、このイベントのなかでも重要な位置を占めています。 ポスターは、およそ2,500人の来場者が見込まれる展示会の会場に掲示されます。

Confirmed posters


Germany
Heidelberg University
Dr Thomas Higgins, Prof Dr Jana Zaumseil
Ambipolar transport properties of printed electrolyte-gated tungsten disulphide nanosheet thin film transistors produced from aqueous inks
UK
Nottingham Trent University
A.S. Satharasinghe, T. Dias and T. Hughes-Riley
Photodiodes embedded in textile yarn sensor
UK
Nottingham Trent University
Dr Dorothy Hardy
Textiles illuminated with electronic yarn
UK
Nottingham Trent University
Theodore Hughes-Riley, Steve Faulkner, Pasindu Lugoda, and Tilak Dias
Temperature sensing textiles for skin temperature monitoring in sport performance
Turkey
Istanbul Technical University
Bedri Utku Baykan
Stretchable and electrically conductive fibres
Germany
Koblenz University of Applied Sciences, RheinAhrCampus
Rashimah Rajah, Ph.D
Managing Cyberloafing in an IoPTS Workplace
Country
Department of Mechanical Engineering, University of Bath
Dr Yan Zhang, Prof. Chris Bowen
Piezoelectric materials for sensing and energy harvesting applications
Country
Karl Otto Braun GmbH & Co. KG, Kaiserslautern University of Applied Sciences
Sabrina Kopf
Smart Bandage: Heating with medical textiles
Lithuania
Kaunas University of Technology
Saulius Grigalevicius, Dain Lo, Chih-Hao Chang and Gintare Krucaite
Blue Aggregation-Induced Emission Materials for Non-Doped Organic Light-Emitting Diodes
Saudi Arabia
Computer Engineering Department, King Fahd Universtiy of Petroleum and Minerals, Dhahran
Muhammad Wasim Raad, Tarek Sheltami
An RFID based Activity of Daily Living for Elderly with Alzheimer's
Taiwan
Taiwan Textile Research Institute (TTRI)
Yu-Chi Wang, Chien-Lung Shen, Tzu-Hao Huang
A Preliminary Evaluation Study of a Wearable Elastic Strain Sensor
Israel
Tel Aviv University
Svetlana Menkin, Dan Schneier, Emanuel Peled, Fernando Patolsky, Diana Golodnitsky, Guy Davidi, Nimrod Harpak, Edna Mados
Novel High-Performance And Low-Cost 3d Silicon Nanostructures Anode For Lithium-Ion Batteries
Denmark
SDU Nanosyd, Mads Clausen Institute, University of Southern Denmark
Elodie Destouesse, Ala Cajocaru, Jani Lamminaho, Horst-GA¼nter Rubahn, Morten Madsen
Flexible barrier foil with embedded ZnO CSP for slot-die coated organic solar cells
Ireland
Tyndall National Institute
Suzanne O'Callaghan, Marco Belcastro, Brendan O'Flynn, Paul Galvin, Conor O'Mahony - Tyndall National Institute, Ireland.
Frank Everaerts, Jeroen Schram - Holst Centre, Eindhoven, Netherlands
Mark Fleming, Ray O'Brien - Fleming Medical Ltd., Limerick, Ireland.
Dermatrax: Development of a Bluetooth-enabled Wound Dressing with onboard temperature and moisture sensing
Germany
Fraunhofer Institute for Ceramic Technologies and Systems IKTS; *Helmholtz-Zentrum Dresden-Rossendorf
M. Vinnichenko, M. Fritsch, D. Makarov*, N. Trofimenko, V. Sauchuk, and M.Kusnezoff
Innovative laser processing of inkjet-printed layers
Saudi Arabia
King Fahd University
Dr. MuhammedWassim Raad, MarquosSamuel, Ali Alquraini, Khalid Alhussain
IoTSchool Bus forTracking and Security title
Country
University of Chemical Technology and Metalurgy - Sofia
Eng. Kosta Shterev, Assoc. Prof. Tatyana Bozhkova, Assoc. Prof. Iskren Spiridonov, PhD
Overview of Security Printing and the implementation of Printed Electronics in it
UK
Manchester School of Art, MMU
Mark Beecroft
Digital Interlooping: 3D printing of weft-knitted textile based tubular structures using selective laser sintering of nylon powder
Israel
Tel Aviv University
Svetlana Menkin, Dan Schneier, Emanuel Peled, Fernando Patolsky, Diana Golodnitsky, Guy Davidi, Nimrod Harpak, Edna Mados
Silicon Nanostructures (SiNS) anode for high energy lithium ion Batteries
UK
De Montfort University
Shashi Paul, Krishnna Nama Manjunatha, Sridhar Govindarajan
Growth of Low Temperature Silicon Nanowires for Energy and Electronic Devices
Country
R&D Center for Low-Cost Plasma and Nanotechnology Surface Modifications, Masaryk University
Tomáš Homola, Richard Krumpolec
Roll-to-roll atmospheric plasma processing of surfaces and nanostructured coatings
Country
R&D Center for Low-Cost Plasma and Nanotechnology Surface Modifications, Masaryk University
Richard Krumpolec, Tomáš Homola
Atmospheric dry hydrogen plasma reduction and selective etching of flexible graphene electrodes and polymeric foils
Israel
Technion - Israel Institute of Technology
Walaa Saliba, Morad Nakhleh, Raneen Jeries, Falk Fish and Hossam Haick
Detection Of Tuberculosis From Exhaled Breath Using Nanomaterial-Based Sensors
Australia
Deakin University
Shayan Seyedin, Sepehr Moradi, Charanpreet Singh, Joselito M. Razal
Conductive Elastomer Fibres for Wearable Strain Sensing Textiles
Germany
Technical University of Dresden - Chair of Microsystems University of Maryland College Park - Department of Aerospace
Maxim Germer, Uwe Marschner, Alison Flatau
Magnetic flux analysis of a magnetostrictive unimorph energy harvester
Netherlands
Eindhoven University of Technology
Jeroen Knippenberg, Joris Remmers, Pascal Etman, Marc Geers
Process modelling of hybrid additive manufacturing with integrated electronics

 

ポスター発表の費用 (€295) に含まれるもの

  • 展示会ホールのポスター掲示スペース
  • 2日間にわたってすべてのカンファレンスセッションと展示会に参加することが可能なパス
  • 昼食と飲み物

ポスター発表の要件

ポスターセッションの応募者は、フルタイムの大学教員か学生に限られます。

執筆者は、4月11日と12日の昼食時にポスターの傍らでプレゼンテーションを行うことになっています。最優秀ポスター賞は、4月11日夕方のドリンクレセプションで発表され、後日さまざまなメディアでも取り上げられます。

ポスター発表の応募要項

ポスター発表を希望される方は、専用のフォームに必要事項を記入のうえ、3月16日までに当社までお送りください。審査を通過した方には、ポスターセッションについての詳しい説明とポスター作成のガイドラインを電子メールでお送りします。

フォームのダウンロード