Cambridge EnerTech’s

Battery Safety
( 電池の安全性 )

電池の試験と規制

2019年3月26日~27日


エネルギー密度の高い電池が数多く市場に投入されるなか、新たな技術に合わせて電池の安全性試験と規制を進化させ、安全に機能する電池を消費者が利用できるようにするための取り組みが重要になっています。電池に関する規制と安全性試験は、研究開発の大幅な進展にも対応できる最先端のものでなければならず、規制機関や業界団体、セルの研究開発に携わっている技術者や信頼性の向上に取り組んでいる技術者は、複雑化するセルとパックの設計に対応可能な堅牢で信頼性の高い試験を開発するという課題に直面しています。電池パックの安定性を維持し、熱暴走を抑制して安全性を高めるための取り組みは、電池の市場投入を成功理に進めるうえで極めて重要な意味を持ちます。

Final Agenda

Monday, March 25

7:00 am – 3:00 pm Tutorial and Training Seminar* Registration Open

7:00 – 8:00 am Morning Coffee

8:00 – 4:00 pm Pre-Conference Tutorials and Training Seminar*

4:00 Close of Day

*Separate registration required for Tutorials and Training Seminar.

Tuesday, March 26

7:00 am Registration and Morning Coffee

電池に関する新たな規制と標準

8:05 Organizer’s Opening Remarks

Victoria Mosolgo, Conference Producer, Cambridge EnerTech

8:10 Chairperson’s Remarks

Cynthia Millsaps, President and CEO, Quality, Energy Assurance LLC

8:15 Battery Regulations for “Drop-In” Lithium-Ion Batteries

Cynthia Millsaps, President and CEO, Quality, Energy Assurance LLC

In recent years, there are more and more applications moving to Li-ion as a replacement for the older lead acid technology. In many cases, a single battery form factor and design can be used in multiple different “drop-in” applications. However, from a standards point of view, there may be a need to apply more than 1 set of tests to the same battery based on the application it is used in. Also, it is not as clear what/who will be driving the need for standards testing and certification in various regions for these types of batteries.

8:45 Talk Title to be Announced

Douglas Lee, Directorate for Engineering Sciences, U.S. Consumer for Product Safety Commission

UL_Enterprise9:15 UL8139 and Promoting Battery Safety in Electronic Cigarettes and Vaping Devices

Michael Sakamoto, Senior Business Development Manager, Consumer Technology Division, UL LLC

The presentation will provide a case for a rapidly developing emerging industry where battery safety is somewhat overlooked but critical, and how UL8139 standard addresses the electrical and battery risks and hazards with an industry certification scheme.

9:45 Networking Coffee Break

熱暴走の軽減

10:15 Chairperson’s Remarks

William Q. Walker, PhD, Aerospace Technologist, Engineering Directorate (EA), Structural Engineering Division (ES), Thermal Design Branch (ES3), NASA Johnson Space Center

10:20 Combining Fractional Calorimetry with Statistical Methods to Characterize Thermal Runaway

William Q. Walker, PhD, Aerospace Technologist, Engineering Directorate (EA), Structural Engineering Division (ES), Thermal Design Branch (ES3), NASA Johnson Space Center

Fractional thermal runaway calorimetry (FTRC) techniques were introduced to examine thermal runaway (TR) behavior of Lithium-ion (Li-ion) cells. Specifically, FTRC considers the total energy released vs. the fraction of the total energy that is released through the cell casing versus through the ejecta material. The original FTRC device was designed to accommodate 18650-format Li-ion cells. This device has been expanded to universally support FTRC testing of additional cell types including 21700-format, D-Cell format, and large prismatic format Li-ion cells. The TR behavior as influenced by cell format, manufacturer, chemistry, capacity, and in situ safety features are described in this presentation.

10:50 Predicting Thermal Propagation Using an Uncertainty Quantification Framework

Kevin Marr, PhD, Research Engineer, Mechanical Engineering, University of Texas at Austin

This presentation will detail an experimental and modeling framework that utilizes an uncertainty quantification (UQ) methodology to predict and evaluate thermal propagation in battery modules. In this framework, small-scale abuse tests of single and multi-cell tests are conducted. Thermal properties and kinetic parameters are estimated using inversion methods and are then used as input parameters to thermal-chemical models to predict the thermal propagation in a full-scale battery.

11:20 Integrated Multiphysics Modeling for Improving Li-Ion Battery Pack Safety

Chuanbo Yang, PhD, Energy Storage Engineer, Vehicle Electrification Group, Transportation and Hydrogen Systems Center, National Renewable Energy Laboratory (NREL)

Battery CAE tools are effective in evaluating safety design concepts and identify key design parameters preventing cascading failures among batteries. An integrated multiphysics safety modeling framework is developed for large format lithium-ion batteries and applied to provide insights into battery pack behaviors subject to internal short circuits. The impact of the energy released by failed battery cells in the form of gas and ejecta on pack safety is addressed in this numerical approach.

11:50 Sponsored Presentation (Opportunity Available)

12:20 pm Grand Opening Networking Luncheon in the Exhibit Hall


1:25 Plenary Keynote Session: Organizer's Remarks

1:30 - 2:00 1000, 2000, 3000 .... N Cycles from Li-Ion Cells: How Large Can N Be?

Jeff Dahn, PhD, Professor of Physics and Atmospheric Science, NSERC/Tesla Canada Industrial Research Chair, Dalhousie University

Our laboratory has developed many methods to help rank the lifetime of cells in relatively short duration experiments (coulombic efficiency, isothermal microcalorimetry, etc.) so that cell developers and users can move rapidly to find next generation chemistries. In this presentation I will describe another powerful method and give examples of how it has been useful in developing outstanding cells that last many thousands of charge-discharge cycles and last many years.

2:00 - 2:30 Battery System Engineering Challenges and Opportunities for the Cell, Pack and System

James Lim, PhD, Battery System Engineering Manager, Google

Designing and verifying a well-balanced battery for safety, reliability, performance, availability, and cost requires strong cross-functional team interactions during system integration and product launch. The opportunities are being able to provide viable options, evaluate tradeoffs, and deliver battery solutions associated with next generation products.

2:30 Dessert Break in the Exhibit Hall with Poster Viewing

SOH/SOCのモニタリングと熱暴走の予防

3:15 Chairperson’s Remarks

Brett Huhman, PhD, Electrical Engineer, Plasma Physics Division, US Naval Research Laboratory

3:20 A Single-Frequency Impedance Diagnostic for State of Health Determination in Li-Ion 4P1S Battery Packs

Brett Huhman, PhD, Electrical Engineer, Plasma Physics Division, US Naval Research Laboratory

A series of experiments were performed to evaluate the performance of a 4P1S battery array using electrochemical impedance spectroscopy to identify key frequencies that may describe battery state of health at any state of charge. The experiment established that discharging batteries in parallel at high C rates resulted in a 75.32% reduction in life compared to operating solo as well as an operating envelope to evaluate battery health. Additionally, a post-mortem analysis of cells from three configurations (baseline, single-cell, and parallel-cell) demonstrated physical damage to the copper current collector in the anode in the parallel-connected cell.

3:50 Development of a Safe, Lightweight Li-Ion 28V Battery for Navy Aircraft Applications

Trung Nguyen, PhD, Vice President, Aircraft Power Sources, EIC Laboratories, Inc.

Lithium-ion batteries, with their high power and energy density, long cycle life, and low self-discharge rate, are an attractive alternative to meet immediate on-board equipment power needs. In comparison with well-established lead-acid and nickel-cadmium batteries, Li-ion batteries offer significant advantages: decreased weight and increased capacity. EIC Laboratories, in a program sponsored by NAVAIR, has developed and qualified a safe, lightweight Li-ion 28V aircraft battery where potential thermal instabilities are eliminated.

4:20 Mechanically Triggered Battery Safety Strategy

Yu Qiao, PhD, Professor, Program of Materials Science and Engineering, University of California, San Diego

Without changing battery chemistry, by modifying current collectors, fracture mode of electrodes in a lithium-ion battery can be favorably adjusted to mitigate thermal runaway. Impact tests on pouch cells showed encouraging results.

4:50 Welcome Reception in the Exhibit Hall with Poster Viewing

5:50 Interactive Breakout Discussion Groups

6:50 Close of Day

Wednesday, March 27

7:15 am Registration and Morning Coffee

運搬時の安全性

8:25 Chairperson’s Remarks

Ahmad A. Pesaran, PhD, Manager, Energy Storage Group, Transportation and Hydrogen System Center, National Renewable Energy Laboratory (NREL)

8:30 Analysis of Factors that Affect Thermal Failures and Propagation in Lithium-Ion Batteries

Steve Hwang, PhD, U.S. Department of Transportation Pipeline and Hazardous Materials Safety Administration (U.S. DOT – PHMSA)

Despite seemingly redundant regulatory frameworks designed to overcome unique safety challenges posed by conditions incident to normal transportation of lithium batteries, cell or battery failures are still occurrences of concern. This study focuses on the safety challenges pertaining to cell or battery thermal failures and failure propagation mechanisms.

9:00 Transportation Complexities of New, Refurbished, and Waste Lithium Batteries

George Kerchner, Executive Director, PRBA - The Rechargeable Battery Association

What happens when lithium batteries are disassembled and refurbished? Are they subject to the dangerous goods and hazardous waste regulations when transported? When lithium batteries reach the end of life and are shipped domestically and internationally as waste, what transport and hazardous waste regulations apply? Do they require a hazardous waste manifest when transported within or exported from the U.S., require an export permit from the U.S. Environmental Protection Agency, and consent from the country receiving the waste batteries?

9:30 Sponsored Presentation (Opportunity Available)

10:00 Coffee Break in the Exhibit Hall with Poster Viewing

二次利用される電池の安全性

10:45 Safety of Aged Pouch Format Lithium-Ion Cells

Judith Jeevarajan, PhD, Research Director, Electrochemical Safety, Underwriters Laboratories, Inc.

The Phase I of our study on aging and safety included the testing of lithium-ion cells of cylindrical format in metal cans that include internal protective features. Pouch format cells do not contain such internal protective features and the safety behavior is very different from the cylindrical format. Results of off-nominal tests such as overcharge and external short on fresh cells and cells that have aged and at various levels of capacity loss will be presented. Results from the destructive analysis of the fresh and aged cells will also be presented.

11:15 Determining Safety of Second Life Batteries

Shriram Santhanagopalan, PhD, Engineer, Transportation and Hydrogen Systems Center, National Renewable Energy Laboratory

This presentation will detail the NREL methods for determining safety of recycled batteries as well as requirements for recycling.

11:45 PANEL DISCUSSION: Department of Energy Focused Battery Recycling Initiatives

Moderator: Ahmad A. Pesaran, PhD, Manager, Energy Storage Group, Transportation and Hydrogen System Center, National Renewable Energy Laboratory (NREL)

This panel will focus on the United States’ newest lithium-ion battery recycling programs. The new battery recycling infrastructure that will be laid out in the US will also be outlined.

12:15 pm Networking Plated Luncheon

1:15 Dessert Break in the Exhibit Hall with Poster Viewing


1:45 Pleanry Keynote Session: Organizer's Remarks

1:50 Shep Wolsky Battery Innovator Award

2:00 PANEL DISCUSSION: What Innovations/Advancements Do OEMs Need to Enable Near-Term, Large-Scale Production?

Moderator:

Celina Mikolajczak, Director of Engineering, Energy Storage Systems, Uber


 

Panelists:

Mohamed Alamgir, PhD, Research Director, LG Chem

Micheal Austin, Vice President, BYD US Operations (BYD America-IT, BYD Motors, BYD Energy)

Craig Rigby, Vice President Technology, Power Solutions, Johnson Controls

Bob Taenaka, Technical Specialist, Battery System Development, Ford Motor Company

What do OEMs need for near term, large-scale innovation? Can the global battery R&D community deliver on what advancements OEMs need for large-scale production? Our distinguished panel will discuss what they need to innovate and what they anticipate their future requirements will be. In addition, our panelists will discuss what innovation can be achieved to meet the OEMs requirements.

2:55 Refreshment Break in the Exhibit Hall with Poster Viewing

3:40 Close of Conference


* 不測の事態により、事前の予告なしにプログラムが変更される場合があります。

Choose your language
Traditional Chinese
Simplified Chinese
Korean
English


更新通知サービス



メール配信サービス